Avalanche G130 is a coolant additive concentrate based on mono ethylene glycol and glycerol. It has a combination of active agents which is formulated using an ingenious selection of inhibitors based on hybrid technology. Avalanche G130 is free of nitrites, amines and phosphates and contains a performance anti-corrosion inhibitor system, based on silicates combined with proven OAT (Organic acid technology). It offers great protection to modern passenger cars as well as commercial vehicle engines against frost, corrosion and overheating across its entire engine service life. Avalanche G130 fulfills the requirements of VW coolant specification VW TL 774-J (G13).
FEATURES & BENEFITS:
- Contains renewable raw materials.
- Contains no amines, nitrites and phosphates.
- Suitable for aluminium as well as cast iron engines.
- Anti-cavitation, preventing foam and the retention of air, ensuring the good performance of the pump.
- Prevents the buildup of deposits, keeping the cooling system clean.
- Extended protection
AAVALANCHE G130 FULFILLS THE FOLLOWING COOLANT STANDARDS:
- AASTM D 3306
PERFORMANCE LEVELS / MEETS OR EXCEEDS:
- Volkswagen TL-774 J (G13)
Avalanche G130 must be diluted with water before filling into cooling system. We recommend distilled or demineralized water for this. Depending on water hardness and quality (hardness not greater than 3.6 mmol/l), dilution with tap water is also possible. Avalanche G300 should be blended with water in a concentration amongst 33% to 60% by volume prior to infilling. The usage of a 50/50 ratio for the mixture of water and Avalanche G130 is generally advisable.
Analysis values of the water may not exceed the following threshold values:
Water hardness: 0 – 3.6 mmol/l
Chloride content: max. 100 ppm
Sulfate content: max. 100 ppm