AVALANCHE G400
Performance
VW TL 774-G (G12++)
Packaging
1L, 4L, 5L, 20L, 25L, 208L
Description:
Avalanche G400 is an Ethylene Glycol based, anti-freeze and anti-boil coolant concentrate. It uses a technically advanced Si-OAT (Organic Acid Technology) based inhibitor system that is Phosphate, Amine, Borate and Nitrite free. The extended long life inhibitor formulation prevents rust, corrosion, cavitation and degradation of the cooling system. Avalanche G400 fulfills the requirements of latest VW coolant specification VW TL 774-G (G12++) and provides a service life of 8 years / 500,000 Km.
Benefits:
FEATURES & BENEFITS:
- Outstanding corrosion protection
- Contains no amines, borates, nitrites or phosphates
- Protects against overheating
- Anti-cavitation, preventing foam and the retention of air, ensuring the good performance of the pump.
- Prevents the buildup of deposits, keeping the cooling system clean.
- Long life service product
AVALANCHE G400 FULFILLS THE FOLLOWING COOLANT STANDARDS:
AS 2108-2004, ASTM D 3306, ASTM D 4985, BS6580:2010, CUNA NC 956-16, AFNOR NFR 15-601, JIS K 2234:2206, PN-C 40007:2000, SAE J1034, ÖNORM V 5123, SANS 1251:2005 and China GB 29743-2013
PERFORMANCE LEVELS / MEETS OR EXCEEDS:
Audi TL 774-G, Bentley TL 774-G, Bugatti TL 774-G, GM 6277M, Cummins CES 14603, Deutz DQC CC-14, Ducati (TL 774-G), Lamborghini TL 774-G, MAN 324 Typ Si-OAT, MB 325.6, MB 326.6 (Ready Mix), MB 325.5, MB 326.5 (Ready Mix), MTU MTL 5048, Porsche TL 774-G, Seat TL 774-G, Skoda TL 774-G, VW TL 774-G, FORD WSS-M97B44-D.
Application:
Avalanche G400 is designed for engines made of cast iron, aluminum or a combination of the two as well as cooling systems with aluminum and/or copper alloys, especially for all-alloy engines in which a special aluminum protection is required at higher temperatures, for passenger cars, commercial vehicles, buses, agricultural machines as well as stationary engines and devices that require a radiator antifreeze of this quality. Fill the cooling system with Avalanche G400 and water according to the desired mixing ratio. We recommend distilled water for this. Depending on water hardness and quality (hardness not greater than 3.6 mmol/l), dilution with tap water is also possible. Avalanche G400 should be blended with water in a concentration amongst 33% to 60% by volume prior to infilling. The usage of a 50/50 ratio for the mixture of water and Avalanche G400 is generally advisable.
Analysis values of the water may not exceed the following threshold values:
Water hardness: 0 – 3.6 mmol/l
Chloride content: max. 100 ppm
Sulfate content: max. 100 ppm