Avalanche G480 is an antifreeze coolant concentrate based on mono ethylene glycol. It is free of nitrite, amine and phosphate. It contains a mixture of inorganic and organic corrosion inhibitors and belongs to the hybrid type coolants. Avalanche G480 protects modern engines of passenger cars as well as commercial vehicles from damages caused by cavitation, freezing, rust and overheating. The highly effective corrosion inhibitors protect all metals in the cooling system from deposit and corrosion. Avalanche G400 fulfills the requirements of VW coolant specification VW TL 774 -C (G11) and provides a service life of 7 years / 450,000 Km
FEATURES & BENEFITS:
- Outstanding corrosion protection
- Contains no amines, nitrites or phosphates
- Universal application at passenger cars and commercial vehicles as well if a silicate based coolant is required.
- Anti-cavitation, preventing foam and the retention of air, ensuring the good performance of the pump.
- Prevents the buildup of deposits, keeping the cooling system clean.
- Long life service product
Avalanche G480 fulfills the following coolant standards:
AS 2108-2004, ASTM D 3306, ASTM D 4985, BS6580:2010, CUNA NC 956-16, AFNOR NFR 15-601, JIS K 2234:2206, PN-C 40007:2000, SAE J1034, ÖNORM V 5123, SANS 1251:2005 and China GB 29743-2013
PERFORMANCE LEVELS / MEETS OR EXCEEDS:
Audi TL 774-C, BMW GS 94000, Deutz TR-0199-99-1115, Deutz DQC CA-14, MAN 324 NF, MB 325.0, MB 325.2, MB-326.0 (Ready Mix), MTU MTL 5048, Opel B 040 0240, Seat TL 774-C,Skoda TL 774-C, VW TL 774-C, Volvo Trucks TR 1286083, Voith Turbo 172.00225010
Avalanche G480 must be diluted with water before filling into cooling system. We recommend distilled water for this. Depending on water hardness and quality (hardness not greater than 3.6 mmol/l), dilution with tap water is also possible. Avalanche G400 should be blended with water in a concentration amongst 33% to 60% by volume prior to infilling. The usage of a 50/50 ratio for the mixture of water and Avalanche G4800 is generally advisable.
Analysis values of the water may not exceed the following threshold values:
Water hardness: 0 – 3.6 mmol/l
Chloride content: max. 100 ppm
Sulfate content: max. 100 ppm